click for detailed specifications

_________________________________________________________

Oil Smoke and Mists Eliminators (Air Filters)

The new CMC series created from SEI represent a qualitative solution to eliminate oil mists, smokes and steam generated during working process using pure or emulsified coolant.

The centrifugal air filter CMC-S series has the characteristic to aspire in vertical way, the tested SELF-CLEANING integrated centrifugal system, grants an efficient pollutants’ knock out at the source with continuous download of the oil condensed particles and therefore a remarkable reduction of maintenance operations.

Additional filtration system are available (post-filter) granting a total cleaning (efficiency 99,97%) or activated coal, to eliminated dry smoke - burned oil - dangerous exhalations.

ADVANTAGES:
- Versatility and easy installation on every kind of machine tool;
- Continuous control of the final filters’ stoppage through signal devices (J version);
- Granted reliability thanks to the high quality of the components used;
- Limited investments scheduled in the time.

QUALIFIED TO:
To eliminate oil mist, smokes and steam with small quantity of dust and abrasive.
(Lathe – Machining Centre – Grinding machine – Gear machine – Cutting machine - Drilling machine - Tranfert machine – Plunge spark erosion).

back to top

click for detailed specifications

Serie CMC-K / CMC-KP - CENTRIFUGAL FILTER

The new CMC series created from SEI represent a qualitative solution to eliminate oil mists, smokes and steam generated during working process using pure or emulsified coolant.

The centrifugal air filter CMC-K series aspires in horizontal and have a pre-filtration room where a cell leaking for the first roughing out of the polluting one is lodged, the tested SELF-CLEANING integrated centrifugal system, grants an efficient pollutants’ knock out at the source with continuous download of the oil condensed particles and therefore a remarkable reduction of maintenance operations.

Additional filtration system are available (post-filter) granting a total cleaning (efficiency 99,97%) or activated coal, to eliminated dry smoke - burned oil - dangerous exhalations.

ADVANTAGES:
- Versatility and easy installation on every kind of machine tool;
- Continuous control of the final filters’ stoppage through signal devices (J version);
- Granted reliability thanks to the high quality of the components used;
- Limited investments scheduled in the time.

QUALIFIED TO:
To eliminate oil mist, smokes and steam also with more quantity of dust and metallic swarf. (Lathe – Machining Centre – Grinding machine – Gear machine – Cutting machine - Drilling machine - Tranfert machine – Plunge spark erosion).

back to top

click for detailed specifications

click for detailed specifications

Oil & Coolant Cleaners and Filters

Serie ST - COOLANT FILTER USING FILTERING CLOTH

This system is used for the filtration of pure or emulsified coolant with a maximum viscosity of 20° cSt at 40°C, contaminated by both magnetic and no magnetic particles.The coolant to be purified is distributed through a dedicated diffuser on the filtering fabric, an electro-mechanical system automatically recognize that the fabric is saturated and provides new fabric restoring the filtering process and downloading at the same time the mud into a collection tank.

The percolated liquid falls into the tank of the clean coolant and through a relaunching pump will be sent to the machine tool. During this operation the filtration cycle is never interrupted.

back to top

click for detailed specifications

Serie STM - COOLANT FILTER USING FILTERING CLOTH WITH MAGNETIC SEPARATOR

A double filtration is obtained combining two different filtering systems: ST and SM.
This combination increase considerably the requested filtration level reducing in the meantime the consumption of the filtering fabric.
The SM cleaner acts on the magnetic particles contained into the coolant and the fabric concludes the process catching all other pollutants.
The high filtration performance and the possibility to combine different sizes, give the STM series a big versatility.

back to top

click for detailed specifications

Serie SM - MAGNETIC SEPARATOR

This system use a permanent magnetic field like a filter. All metallic impurities are collected from the rotating discs and than automatically removed trough proper stainless steel blades (mud scratch blades) and than unloaded into the mud’s tank.

The percolated liquid falls into the tank of the clean coolant and through a relaunching pump will be sent to the machine tool. The magnetic cleaner does not use filtering materials to be wasted and allows the differentiated removal of the waste. The SM-C series is equipped with a rear jet-breaker diffuser which decreases the incoming speed of the dirty coolant into the magnetic divider.

back to top

click for detailed specifications

Serie J -

Born with the technological evolution of the machine tool’s high pressure working process, are equipped with sophisticated control systems of the filtration process.
The coolant is purified flowing through several (regenerable) cartridge filters and released to the machine tool with an high pressure pump.

This cleaner is equipped with a filter stoppage alarm as well as with a solenoid valve for the manual or automatic exchange of the filters. During this operation the filtration cycle is never interrupted.

Available with pressure till 70 BAE, they grant high filtration value to the coolant (till 5 micron) especially for precision working. For heavy processing or by the presence of elevated quantity of solid pollutant, generally are preceded by magnetic or textile pre-filtering stages.

QUALIFIED TO:
be used with all machine tools using high pressure coolants (spindle’s internal feeding).

back to top

click for detailed specifications

Serie SO-N - OIL EXTRACTOR

With oil skimmer SO-N series your coolant fluid will last longer.
Hydraulic oils combined with processing residues, build up on the surface of the coolant tanks and prevent the fluids from being oxygenated. This results in a gradual deterioration of the fluid’s chemical-physical equilibrium, a loss in the lubrication and cooling properties of the fluids and give out nasty odours.

The band of the skimmer’s Serie SO-D, partially submerged in the fluid, collect floating oil on the surface. Appropriate scratch system provide the unload of the reclaimed oil into a collection tank. Ease of installation make this oil skimmer suitable for application to existing systems as well. It is possible to plan the oil divider’s functioning based on the needs of the machine tool, optimizing the filtration process.

By removing the extraneous oil from the emulsion you are:

• creating a longer coolant service life;
• reducing the purchase of the same;
• reducing the removal costs;
• decreasin the tool’s wear.

back to top

click for detailed specifications

Serie SO-D - OIL EXTRACTOR

With oil skimmer SO-D series your coolant fluid will last longer.
Hydraulic oils combined with processing residues, build up on the surface of the coolant tanks and prevent the fluids from being oxygenated. This results in a gradual deterioration of the fluid’s chemical-physical equilibrium, a loss in the lubrication and cooling properties of the fluids and give out nasty odours.

The oil skimmer’s rotary disk SO-D serie, partially submerged in the fluid, collect floating oil on the surface. Appropriate scratch system provide the unload of the reclaimed oil into a collection tank.

Available in two versions using a disc ø 300 and ø 500 mm., can be fitted to all kinds of eater-based fluid tanks. Ease of installation make this oil skimmer suitable for application to existing systems as well. It is possible to plan the oil divider’s functioning based on the needs of the machine tool, optimizing the filtration process.

By removing the extraneous oil from the emulsion you are:

• creating a longer coolant service life;
• reducing the purchase of the same;
• reducing the removal costs;
• decreasin the tool’s wear.

back to top

FILTERING CLOTH

Non-woven fabric has been used in the mechanical industry to filter coolants on automatic, pressure and vacuum filters.
Non-woven fabric must meet the specific demands of the each single application.
Type of fluids, flow, degree of filtering, viscosity, temperature and concentration of the pollutant, make is possible to choose the most suitable type of non-woven fabric to obtain the best filtering result at the lowest plant operating cost.

Available in standard rolls 100 m length in the following width: 500-700-1000-1400 mm.
(Special sizes on request).

back to top